How to Make Step down voltage converter using transistor MJE13003

How to make Step down voltage circuit diagram using transistor MJE13003.

5v to 1.5-4.7v converter project using transistor MJE13003

Circuit Diagram

step down voltage circuit diagram

Circuit Components

  1. MJE13003 Transistor [See Buy Click Amazon]
  2. 1uf,50V Capacitor[See Buy Click Amazon]
  3. 10k Variable Resistor[See Buy Click Amazon]
  4. 560R Resistor[See Buy Click Amazon]

*Please note: These are affiliate links. If you purchase items through these links, I may make a commission. I would appreciate your support in this way!


Read Also:


Components used to Step down voltage converter:

  1. MJE13003 Transistor
  2. Transistor MJE13003

    High voltage fast-switching NPN power transistor. The device is manufactured using high-voltage multi-epitaxial planar technology for high switching speeds and high-voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA.

  3. Structure of MJE13003 Transistor
  4. MJE13003 Transistor pinout

    This is an NPN transistor. Features: High voltage capability, Low spread of dynamic parameters, Very high switching speed and Applications: Electronic ballast for fluorescent lighting (CFL), SMPS for battery charger

  5. 1uf,50V Capacitor
  6. Capacitor,50V,1uf

    The capacitor is a Two-Terminal passive component having the Property of Capacitance. This Property Electrifies (charging with electricity) Capacitors with input Voltage. Capacitors Condense Electricity, Hence it is also known as a Condenser. It consists of two Electrical Conductors that are Separated by Distance. The Capacitor Stores Charge and can act like a Battery. It is necessary for filter Circuits to Minimize voltage spikes, and Smoothing changes in voltage.

  7. 10k Variable Resistor
  8. Variable Resistor 10k

    A variable resistor typically has three terminals: two fixed terminals at the ends of the resistive track and one movable terminal (the wiper). Depending on how the terminals are connected to a circuit, a variable resistor can function as a rheostat or a potentiometer.A resistor of which the ohmic resistance value can be adjusted. Either mechanically (potentiometer, rheostat) or electronically (digital potentiometer). A variable resistor is a resistor for which the electric resistance value can be adjusted. A variable resistor is in essence an electro-mechanical transducer and normally works by sliding a contact (wiper) over a resistive element. When a variable resistor is used as a potential divider by using 3 terminals it is called a potentiometer.

  9. 560R Resistor
  10. 560R Resistor

    Carbon Film Resistor.Value: 560 Ohm Wattage: 1/4W, Approximate Maximum Current: 21.13mA, Tolarence: ±5% Durable and easy to install small, low noise, precise and stable performance.Long service life.560 Ohm Resistor Color Code: Green, Blue, Brown, Golden.

Frequently Asked Questions:
What is the maximum Collector-emitter(VBE=0)voltage of MJE13003?

MJE13003 maximum Collector-emitter voltage(VBE=0) is 700 Voltage.

What is the maximum Collector-emitter voltage(IB=0) of MJE13003?

MJE13003 maximum Collector-emitter voltage(IB=0)) is 400 Voltage.

What is the maximum Collector current(Ic) of MJE13003?

MJE13003 maximum Collector current(Ic) is 1.5 Amp.

What is the maximum Collector peak current(Ic) of MJE13003?

MJE13003 maximum Collector peak current(Ic) is 3 Amp.

What is the maximum Base current(Ib) of MJE13003?

MJE13003 maximum Base current(Ib) is 0.75 Amp.

What is the maximum Base peak current(Ib) of MJE13003?

MJE13003 maximum Base peak current(Ib) is 1.5 Amp.

What is the maximum watt of MJE13003?

MJE13003 maximum watt is 40 Watt.

Video: Circuit Test

Post a Comment

Previous Post Next Post

Advertisements

Advertisements

Hobby EEE Projects
Hobby EEE Projects Subscribe our Youtube Channel
Subscribe