How to make a Variable voltage regulator
Circuit Diagram
Circuit Components
- MJE13003 Transistor-01pc [See Buy Click Amazon]
- 10k Variable Resistor-01pc [See Buy Click Amazon]
- 560R Resistor-01pc [See Buy Click Amazon]
*Please note: These are affiliate links. If you purchase items through these links, I may make a commission. I would appreciate your support in this way!
Read Also:
Components used to adjustable voltage regulator:
- MJE13003 Transistor
- Structure of MJE13003 Transistor
- 10k Variable Resistor
- 560R Resistor
High voltage fast-switching NPN power transistor. The device is manufactured using high-voltage multi-epitaxial planar technology for high switching speeds and high-voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA.
This is an NPN transistor. Features: High voltage capability, Low spread of dynamic parameters, Very high switching speed and Applications: Electronic ballast for fluorescent lighting (CFL), SMPS for battery charger
These devices are designed for high−voltage, high−speed power switching inductive circuits where fall time is critical. They are particularly suited for 115 and 220 V SWITCHMODE applications such as Switching Regulators, Inverters, Motor Controls, Solenoid/Relay drivers and Deflection circuits.
A variable resistor typically has three terminals: two fixed terminals at the ends of the resistive track and one movable terminal (the wiper). Depending on how the terminals are connected to a circuit, a variable resistor can function as a rheostat or a potentiometer.A resistor of which the ohmic resistance value can be adjusted. Either mechanically (potentiometer, rheostat) or electronically (digital potentiometer). A variable resistor is a resistor for which the electric resistance value can be adjusted. A variable resistor is in essence an electro-mechanical transducer and normally works by sliding a contact (wiper) over a resistive element. When a variable Resistor is used as a potential divider by using 3 terminals it is called a potentiometer.
Carbon Film Resistor.Value: 560 Ohm Wattage: 1/4W, Approximate Maximum Current: 21.13mA, Tolarence: ±5% Durable and easy to install small, low noise, precise and stable performance.Long service life.560 Ohm Resistor Color Code: Green, Blue, Brown, Golden.
Frequently Asked Questions:
What is the maximum wattage of resistor 560R?
Resistor 560R ohm maximum 0.25 watt.
What is the maximum current of resistor 560R?
Resistor 560R ohm approximate maximum Current: 21.13mA.
What is the color code of resistor 560R?
560 Ohm Resistor Color Code: Green, Blue, Brown, Golden
What is the maximum watt of Transistor MJE13003?
Transistor MJE13003 maximum watt is 40 Watt.
What is the maximum Collector-emitter(VBE=0)voltage of Transistor MJE13003?
Transistor MJE13003 maximum Collector-emitter voltage(VBE=0) is 700 Voltage.
What is the maximum Collector current(Ic) of Transistor MJE13003?
Transistor MJE13003 maximum Collector current(Ic) is 1.5 Amp.
Post a Comment